Mechanism Design Using Creo Parametric

Her på siden vil du finde de oplysninger, du skal bruge, for at kunne tage stilling til om kurset "Mechanism Design Using Creo Parametric", er det rette kursus for dig. Hvis du har nogle spørgsmål til nedenstående, så er du yderst velkommen til at kontakte os via nedenstående formular.

Nedenstående indhold er på engelsk for at matche vores kursusmateriale, som også er på engelsk.

Course overview

In this course, you will learn about creating mechanism connections, configuring the mechanism model, creating a kinematic analysis, and evaluating results. Mechanism Design using Creo Parametric is designed for experienced users who want to add motion to their models by creating mechanism connections and servo motors.

In Creo Parametric you can add motion to your models using the standard mechanism functionality, often referred to as the Mechanism Design Extension (MDX). These topics will enable you to simulate the range of motion between components in your moving assemblies, create gear connections that simulate the gear ratios, create Cam connections that enable Creo Parametric parts to “push” other parts they come into contact with, and check for collisions between moving components.

After completing this course, you will be prepared to work on mechanism designs using Creo Parametric Mechanism Design. At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in PTC University Proficiency intended to evaluate your understanding of the course as a whole.

This course has been developed using Creo Parametric.

Course information

What

CAD system: Creo Parametric
Teaching language: Danish
Teaching material: English
Prerequisities: Introduction to Creo Parametric or Intro to Creo for users trained in other systems
Duration: 1 day
Price: 4.900 DKK pr. person.

When

We hold courses regularly. Some are already scheduled, others are not yet. Contact us to hear more and sign up for the course.

Who

This course is intended for design engineers and mechanical designers who need to add and evaluate the motion of their assemblies. People in related roles will also benefit from taking this course.

Course objective

  • Introduce the mechanism design process.
  • Create mechanism connections.
  • Configure motion and analysis.
  • Evaluate analysis results.

Har du spørgsmål omkring kurset?

Hvis du er i tvivl om, hvorvidt dette kursus er det rette for dig, så er du mere end velkommen til at spørge.

Udfyld venligst formularen, så kontakter vi dig snarest!

Er dette ikke det rette kursus for dig?

Vi går op i, at du finder det helt rigtige kursus for dig. Vi vil nemlig gerne sikre, at du får det helt rigtige ud af at deltage i et af vores kurser. Derfor er det også helt okay, hvis dette kursus ikke er det rette for dig!

Vi tilbyder flere forskellige kurser indenfor både CAD og PLM. Så prøv at tage et kig på vores øvrige kurser. Måske du der kan finde lige netop det du søger.

Vi holder dig opdateret

Nyhedsmail
Tak for din henvendelse
Something went wrong